DAEYANG ENG CO.,LTD
51, Sanmakgongdannam 11-gil, Yangsan-si, Gyengsangnam-do, Republic of Korea
This equipment is a Gantry Type Drilling M/C that is processed while the spindle head moves in the X and Y directions.
Since the table is fixed, large workpieces can be loaded and high-speed, high-precision machining can be performed.
If you select options such as ATC, continuous processing is possible.
The number of spindles can be selected 1 or 2 to increase the efficiency of work.
4-SPINDLE GANTRY DRILLING M/C
This equipment is a 2-axis SPINDLE Gantry Type Drilling M/C.
By configuring a 300mm×300mm Ram Spindle, you can increase the efficiency of work through powerful cutting and simultaneous work.
In addition to drilling, various operations such as end mill and face mill can be performed.
When selecting the equipment with the Tilting function, the same angle work as the Helix baffle can be performed, and the Tube Head work using the auxiliary JIG can be easily performed.
NX CAM - SIEMENS사의 2-Spindle 전용 CAM software
NX CAM – CAM software for 2-SPINDLE from SIEMENS
편리하고 간단한 UI로 구성되어 있으며, 툴패스 경로 검증을 통해 2-spindle 동시 가공률을 향상시켜 가공시간을 최소화합니다.
It is composed of a convenient and simple UI and minimizes machining time by improving the simultaneous machining rate of 2-spindle through toolpath path verification.
2D 홀 단면
3D 모델링 작업
(DMGD2 가공 환경 적용)
(Processing Environment setting)
홀 가공 데이터 (서브 프로그램)
Hole drilling data (Sub)
최적의 가공경로 계산
Calculation Best drilling path way
홀 가공 데이터(메인 프로그램)
Hole drilling data (Main)